Current Construction Material Rates in Rawalpindi & Islamabad - 2026
If you're planning a house construction, a boundary wall, or a bigger commercial job in Rawalpindi or Islamabad, the first thing you need to know isn't the design, it's what materials actually cost right now. Prices for crush, sand, and bricks move around a fair bit in this market, and building your budget on old numbers is one of the easiest ways to end up short. This page walks through the current rates and answers the questions we get most often from builders, contractors, and homeowners. It's put together by Dhurnal Enterprises, a Rawalpindi-Islamabad building materials supplier that sources directly from the Margalla quarries and the Lawrencepur/Ghazi sand yards, so the numbers below come from real supply, not a guess.
What do construction materials cost right now in Rawalpindi and Islamabad?
Rates are quoted per cubic foot (cft). Prices can shift with fuel costs and demand, so treat the table below as a solid current reference, and confirm the exact figure with your supplier before placing a large order.
| Material & Variant | Current Rate (PKR / cft) |
|---|---|
| Margalla Crush (05-12 mm) | 95 |
| Margalla Crush (12-20 mm) | 145 |
| Margalla Crush (20-25 mm) | 150 |
| Margalla Crush (25-38 mm) | 130 |
| Water Bound Crush (50-75 mm) | 130 |
| Granular Sub-Base (0-40 mm) | 120 |
| Sand Lawrencepur (Regular) | 120 |
| Sand Lawrencepur (Harrow) | 130 |
| Sand Ghazi (Plaster sand) | 148 |
| Local Bricks | 26 |
| Peshawari Bricks (A Grade) | 30 |
These are our current rates. For bulk orders or a firm quote for your site, reach out to Dhurnal Enterprises on WhatsApp and we'll confirm pricing for your exact location and quantity.
Which Margalla crush size should I use for my project?
Margalla Crush is the backbone of most structural work in the twin cities, and the size you need really depends on the job. For residential foundations and RCC slabs, most people go with 12-20 mm, since it packs well and bonds cleanly with cement. The 05-12 mm size is better where you need a finer aggregate, like thin concrete toppings. For commercial and infrastructure work, parking areas, road bases, and larger footings, contractors usually lean on the 25-38 mm or Water Bound Crush (50-75 mm) variants, since they carry load well and cost less per cft. Getting the size wrong is one of the more common (and expensive) mistakes on a site, so it's worth confirming the spec with your engineer before you order.
What's the difference between Lawrencepur and Ghazi sand?
Lawrencepur Sand is known for clean grains and strong bonding, which makes it the go-to for masonry and concrete. It comes in two grades: Regular, used for general construction, and Harrow, a finer cut that's popular for plastering because it leaves a smoother surface. Ghazi Sand is a naturally fine plaster sand that covers walls well and often needs fewer coats, which is why a lot of contractors reach for it specifically on interior finishing and decorative surfaces. In practice, it's common to see both used on the same site: Lawrencepur for the structural work, Ghazi for the final plaster coat, so you get a good balance of cost and finish.
Should I use local bricks or Peshawari bricks?
Local bricks are the more budget-friendly option, and they work fine for boundary walls, partitions, and anywhere that doesn't carry structural load. Peshawari Bricks (A Grade) are kiln-fired to a higher standard, so they hold up better under load and resist moisture, which is why they're the standard choice for load-bearing walls and multi-story structures. If your drawings call for load-bearing masonry, it's worth paying the premium for A-Grade Peshawari bricks. For a simple boundary wall, local bricks usually do the job just fine.
Why do material prices move around so much?
A few things tend to drive the changes you see in crush, sand, and brick pricing:
- Fuel costs - every load has to travel from the Margalla quarries or the sand yards to your site by truck, so diesel prices feed straight into the rate.
- Seasonal demand - monsoon repairs, winter construction pushes, and government infrastructure projects can all pull demand up at the same time.
- Regulatory changes - quarry access fees, transport permits, and provincial taxes can shift supplier costs without much warning.
- Supplier stock levels - when a quarry or yard runs low, or deliveries get delayed, prices can tick up for a while until supply catches up.
How can I get the best rates as a contractor or homeowner?
A few habits make a real difference over the course of a project:
- Buy in bulk during slower months to lock in better per-cft pricing before demand picks up.
- Check with more than one supplier instead of sticking with the first one you find. Rates can vary noticeably across the same city.
- Ask for rate updates over WhatsApp so you know when prices move in your favor.
- Inspect the material when it's delivered, especially sand and bricks, since quality can vary even within the same stated grade.
- Don't over-order since extra material sitting on site can degrade or just take up space you didn't plan for.
Do these rates apply across all of Rawalpindi and Islamabad?
Yes, these rates hold across the sectors and towns of both cities, though delivery charges can vary depending on how far your site is from the quarry or yard. For an exact landed cost, share your location when you request a quote and we'll work it out for you.
Frequently Asked Questions
Why do crush rates change?
Mostly fuel prices, quarry output, and demand. Even a small shift in diesel cost can move the price per cft.
Is Lawrencepur sand better than Ghazi sand for plaster?
Lawrencepur gives you cleaner grains and stronger bonding, while Ghazi gives a smoother plaster finish. A lot of contractors blend both to get the benefits of each.
Can I lock in bulk rates for a month?
Yes, many suppliers, including us, offer fixed-rate contracts for bulk orders. Reach out and we can talk through the terms.
Are these rates valid across all sectors of Islamabad?
Yes, they apply across Rawalpindi and Islamabad, though delivery charges may vary by location.
Which crush size is best for a house foundation?
Margalla Crush 12-20 mm is the standard pick for residential foundations. It packs well and bonds cleanly with cement.
Contact Dhurnal Enterprises - Building Materials Supplier
Kamran Shahid - Dhurnal Enterprises
WhatsApp: +92 321 5215281
Location: Rawalpindi & Islamabad
Website: margallacrush.com
In short
Material costs in Rawalpindi and Islamabad shift with fuel prices, seasonal demand, and how much stock suppliers have on hand. Knowing the current rates and having a supplier you can call directly makes it a lot easier to plan your budget with confidence instead of guessing. If you're about to place an order, reach out and we'll confirm the latest pricing for your project.
